Worldwide comparison of 110 LED testing laboratories: Results Presented
Today, the governments of ten countries announced the publication of the world’s largest interlaboratory comparison on solid state lighting (SSL). This project compares the ability of 110 laboratories worldwide to test Light Emitting Diode (LED) lamps and luminaires. The outcome of this large-scale interlaboratory comparison will help governments and manufacturers around the world ensure that new LED products sold to consumers and companies are of high quality and meet the claimed performance.
Workshop on International Standards for Energy Efficiency
A flyer with further information can be viewed here. Or the following link directs you to the dedicated website: http://www.cvent.com/events/ This event is by invitation only. Registration deadline is 10 February 2014, the registration link can
Webinar on SSL Annex IC 2017 – Goniophotometers (European/North American time)
Dr. Yoshi Ohno, Task Leader of IC 2017, will give two free webinars to present the results of IC 2017 and take questions. The content of both webinars will be the same, however one is scheduled
Webinar on SSL Annex IC 2017 – Goniophotometers (Asian / Australian time zone)
Dr. Yoshi Ohno, Task Leader of IC 2017, will give two free webinars to present the results of IC 2017 and take questions. The content of both webinars will be the same, however one is scheduled
Webinar on Lifetime Testing of Light Emitting Diodes and LED Products (European / North American time zone)
Dr. Nadarajah Narendran and Jean Paul Freyssinier from the Lighting Research Centre in Troy, New York, USA will present a summary of the results of a literature review of LED product testing from a report published
Webinar on Lifetime Testing of Light Emitting Diodes and LED Products (Asian / Australian time zone)
Dr. Nadarajah Narendran and Jean Paul Freyssinier from the Lighting Research Centre in Troy, New York, USA will present a summary of the results of a literature review of LED product testing from a report published
Visual Perception under Energy-Efficient Light Sources – – Detection of the Stroboscopic Effect under Low Levels of SVM
Temporal light modulation (TLM, known colloquially as “flicker”) of light sources has visual, neurobiological, and performance and cognition effects on viewers.
Updated LED product requirements on quality and performance for global use
Today, the IEA 4E SSL Annex published its new and updated “quality and performance requirements” for the most popular LED lamps and luminaires. These specifications, elaborated by experts in the Annex’s six member governments, are not tied
UNEP Webinar on CIE S 025/E:2015
UNEP will hold a webinar on 7 May at 09h00 Stockholm time with Mr. Tony Bergen, Secretary of CIE Division 2. Mr. Bergen will provide an overview of the recently published CIE S 025/E:2015, Test Method for
The SSL Annex in Two Minutes!
The SSL Annex launched a new animated video today that presents the SSL Annex work in two minutes! See the video below and watch the video to learn more about how we work with governments to:
The IEA 4E SSL Annex issues new report promoting CIE’s new global test standard
The IEA 4E Solid State Lighting Annex today published a new report promoting CIE’s new global test standard. The report, entitled “Application Study of CIE S 025/E:2015”, evaluates the new international standard for use by key stakeholders as the basis for measuring important quality and performance aspects of LED lighting products. The SSL Annex has concluded that the new CIE standard is suitable for its upcoming global interlaboratory comparison of goniophotometers.
The “How To” Briefing Accompanying the Global Lighting Challenge
Following the launch of the Global Lighting Challenge aiming at deploying 10 billion super-efficient light sources, the IEA 4E SSL Annex today published an Executive Briefing that summarises the best practices, programmes and other initiatives undertaken by its member countries to accelerate the adoption of quality, energy-efficient LED technology in their markets.
Testing & Standards
How do we ensure SSL product quality? How can we be confident that product test results are reliable? Lifetime testing is particularly relevant for policy makers and market surveillance authorities who are concerned with verifying lifetime
Task G workshop: New motor technology
NULL — !map:HashWithIndifferentAccess full_width_image_alt: “” latitude: “” content_width_image_alt: “” show_event_location: “1” contact_email: “” annex: electric-motor-systems category: Presentation email: “” contact_tel: “” full_width_image: “” manchet: Zurich, Switzerland tel: “” contact_postal-code: “” image_link: “” street-address: “” locality: Zurich,
Task C workshop: Testing Centres
NULL — !map:HashWithIndifferentAccess full_width_image_alt: “” latitude: “” content_width_image_alt: “” show_event_location: “1” contact_email: “” annex: electric-motor-systems category: Presentation email: “” contact_tel: “” full_width_image: “” manchet: Zurich, Switzerland tel: “” contact_postal-code: “” image_link: “” street-address: “” locality: Zurich,
Sustainable Buildings Workshop
The IEA will be hosting this workshop on November 12 – 13, 2014 at their offices in Paris. A major focus of the workshop will be dedicated to their buildings analytical methodology, data sources, model input
Summary Report of Nucleus Laboratory Comparison
In 2012, the Annex completed its first set of tests designed to confirm the competence and equivalence of the “nucleus laboratories” which are NIST (USA), NLTC (China), VSL (The Netherlands), and AIST, NMIJ (Japan)
Strategies In Light – Europe
NULL — !map:HashWithIndifferentAccess show_event_location: “1” longitude: “” show_contact_information: “” contact_organisation_url: “” contact_postal-code: “” contact_locality: “” contact_tel: “” image_link: “” full_width_image_bgcolor: “” organisation: “” content_width_image_alt: “” postal-code: “” annex: solid-state-lighting email: “” full_width_image: “” category: Workshop organisation_url:
Standby of Smart Lamps – Second Report
Report Overview Smart lamps and luminaires are common in today’s lighting market. Smart lighting provides an opportunity for the consumer to benefit from wireless control of lighting products, e.g. by dimming, colour tuning and scheduling. These
Standby of Smart Lamps – First Report
Report Overview Smart lamps are an exciting new family of products which provide an opportunity for the consumer to benefit from smart services, better product quality and energy savings. Combining wireless communication, intelligent controls and light
